Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.

No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").
br /
br /Just picked the nailer up August 31st from H.D...
br /
br /First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.
br /
br /Pro's:
br /* Cordless! Don't have to drag out the air compressor.
br /* Cool headlights. Good for doing trim in darker areas.
br /* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to fit at H.D.) Used for crown, casing, base and quarter-round shoe molding--made small, tight holes, no problems.
br /* Accurate electronic depth adjustment. 1-6 range, 6 setting will just countersink in 3/4 oak
br /* Bump-firing! Unlike Senco AirFree, you can set the DeWalt to single fire or bump. When on bump mode, it drives at a consistent depth. The motor spools up when you press the trigger, and then bam, bam, bam
br /
br /* Good grip. Feels like typical DeWalt grip. Stays in you hand while sweaty, quality trigger feel.
br /
br /* Spare battery. Good Dewalt charger, quality carrying case (with steel buckles instead of plastic)
br /
br /Cons
br /
br /* Porky. Not just heavy, but the head of the unit is kinda fat, it has a belt clip, which you have to use, because you can't park it in your bags. It does work OK with a Monster Hook, so no big whoop. It will also nail shoe molding just fine while upside-down.
br /
br /* Yellow headlights. I know yellow is DeWalt's thing, but white would have been better.
br /
br /* Price. $400.00 is a good chunk of cash.
br /
br /Overall, great result for a first-time release. Absolutely SPANKS the Senco AirFree--then sends it to bed without dinner.

I just bought this about 2 weeks ago, so I can't attest to its durability, but this is the best investment I have made in ages. I did drop from a ladder onto concrete, with no problems. I used this to hang a prehung exterior door and put down some shoe molding last week and it was great. I assumed that I would have to wait for it to charge a spring or something before I could shoot a nail, but it's ready to go as soon as you pick it up. When you pick it up and just feather the trigger, two little work lights come on and the motor spins up and it will shoot nails as fast as you pull the trigger. As with all nail guns, it won't shoot until you press the shoe against the wood. It also has a bump-firing mode where you can hold the trigger in and it will shoot a nail every time you bump it. It uses the Paslode 22 deg. nails from 1¼ -2½ . The 2 1/2" nails are great for large trim. I used them to tie doorjambs to the studs. Seems to shoot a zillion nails on a single battery. Much quieter than my air nailers. Nail depth control is the best I have seen. The case has storage room for 4 boxes of nails. The body is big, but it's very light. Get the angled model, not the straight one; they're the same price.

This tool is solid and works as advertised. So it weighs 8.5 lbs... if you are going to be nailing over your head for hours straight then break out the air hose. I did the same when using my Paslode.
br /
br /This tool replaced my Paslode Impulse Finish nailer. I've not looked back. Ample power and drives nails well with very predictable depth control.
br /
br /Get the angled nailer, easier to place and nail in tighter spots. With the size of the gun, you'll need it.
br /
br /If you are looking for the possible negatives...
br /Somewhat costly to purchase
br /It is heavy, but the tool compensates me for this with performance and convenience
br /I miss being able to sit the tool down on the front face like the Paslode. The Dewalt rolls over sideways if you try. This makes it difficult to set it down and retrieve from the floor or a ladder shelf. I glued rubber feet to the front, problem solved.
br /If doing production, long nails, hard wood... keep batteries ready to go. I find I can run 3 clips of 2 1/2" if attaching solid oak face trim. For regular use and 1 1/2" nails I get 5 to 6 clips through it.
br /Don't use the belt clip unless you are trying to remove your pants.
br /High profile theft item, bright yellow, easy to lay about, high dollar value... watch it close or you'll be buying a second one real soon. (Soap Box - Thieves should have a finger removed for each item they steal until they learn or can't pick anything up anymore. Seems fair, 10 chances and all.)
br /Rather large for tight spots, but amazingly it can get places I would have said it couldn't.
br /
br /Now, for those that own a selection of 18V tools, consider the kit purchase comes with two batteries... buying two batteries is $100. (you get a 3rd if you buy soon) For me, that's a $100 credit toward the purchase of the gun.
br /
br /Buy it, enjoy it.

I find the finish nailer to be extremely useful. I frequently detail out properties going on the market. The nailer is perfect for installing baseboards, quarter round and crown mouldings, without the hassle of hauling a compressor and hoses. I find it simple to operate, it is simple to load, simple to set depth. I do not see it as being any heavier than a gun with a snarly hose attached. It sinks more nails on one battery charge than I have had a need for at any job yet. Personally I think it's the greatest thing since sliced bread.

First, I'll start by saying that I already owned a few DeWalt 18v products, and I have been very pleased with them. I was so tired of carrying around a 75 lb compressor and hose for mid-size trim jobs that I started looking cordless. I'm sure the Passlode is a nice tool, but I already own 18v DeWalt batteries, and I didn't want to deal with the Passlode fuel cells and batteries.
br /
br /Now, for the performance - this does just as good a job as my DeWalt and PC pneumatic finish nailers. It can sink nails through 1x oak baseboard, through a sheet of plywood and into a stud, and do in with excellent depth consistency. It's not going to replace my pneumatics on a large job, as one battery lasts about 4 clips of nails. It was great for putting up chair rail in the last basement I finished, but if I were trimming an entire house, it would be time to break out the compressor and hoses.
br /
br /A bonus - I find myself using this for my woodworking projects as well. I can set the depth to leave the nail proud of the surface, and tack items together for gluing. This lets me setup my work without struggling to hold the work and the clamps. Fire a few nails, set down the work and then get the clamps.
br /
br /I have only two small complaints:
br /One is battery life. It may not be possible to improve it, given all that this gun has to do (I wouldn't give up the work lights for battery life!), so it may be a reasonable compromise, but four clips of nails is not a whole lot. Plan on needing 3 batteries for continuous use.
br /
br /Second is price. I think the price of the gun is a little steep. My wife gave it to me as a gift, so I can't complain too much - I'd been eyeing it for some time, but couldn't justify the price.
br /
br /I don't rate many things with five stars, as there is always room for improvement. Four stars, however, is a rating to me that means I'd spend my own money on it again.
br /
br /UPDATE:
br /I replaced my batteries with new XRP's, replacing some old XR+'s. I now rate this as five stars! It's not the gun eating batteries, mine were worn out. I did a 2000 sq ft house on 2 batteries. Wow.

Okay, I just got this nailer and I love it already. I have a new crown moulding in the bedroom that has been tacked up with a couple of nails. In my spare time, I've been working my way around the room finding the studs, drilling the holes, nailing the nail, then countersinking. Not an easy feat on the ladder! I was about half way done after a few hours worth of work. Then I got the DeWalt nailer and I finished the job in 15 minutes! Find the stud, shoot the nail, you're done.
br /
br /The Pros:
br /*No Cord (duh)
br /*No fuel cell
br /*Easy and consitent depth setting
br /*Nice balance
br /*Speed, speed, speed...it can nail faster than you can pull the trigger
br /
br /The Cons:
br /*It's heavy (8.5 pounds loaded), but, who cares? It's so much fun to use you forget about the weight
br /*Limited nail length range
br /
br /This nailer is fantastic and solved the problems with pnuematic or fuel cell nailers. I haven't had a jam yet, but if I do, it looks easy to clear.
br /
br /Get this nailer! You'll be sorry if you don't
br /
br /

I work in Palm Beach County, Florida and the company that I work is high end trim company that works on the millionaire estates of the area. The trim work is endless and this gun has not let me down a single day... one battery keep me going for a day and half, setting crown and base board...
br /It has a very good grip, fits in almost every corner, and never jams or misfire, and the best it doesnt have the bad smell like the Paslode and doesnt need gas cans...
br /The bad part it is a bit heavy...but you'll get used to it... but not to have to drag the compressor and hose around and now I have much more room in the tool box of my truck this is truelly priceless...
br /

I recently had a chance to use one of these new DeWalt nailers and thought I would share my observations.
br /
br /First of all, this nailer is HUGE! I was prepared for the weight of it - everyone mentions that - but I was unprepared for how big it is. I have large hands and yet this thing makes me feel like a five year old lifting his Dad's framing hammer! Despite all that size, the weight is well balanced and it handles surprisingly well. To be honest though, I was using it at waist level while standing. I am not sure it would be much fun to use overhead while standing on a ladder!
br /
br /As for nailing performance... This gun can truly fire as fast as you can aim and squeeze. The funny mechanical noise that another reviewer mentioned is normal - I believe that DeWalt designed this gun with some sort of "flywheel" inside to keep the umph going for rapid fire shooting. In any event, it works and works well. You can shoot one heck of a lot of nails per battery charge and jams are easy to clear. I only used 2" nails in the gun, so I cannot give an opinion on performance with other lengths, but with the 2" I was very impressed.
br /
br /Overall I think this gun is a great idea that will be a boon to trim carpenters on the go. For a shop, or wherever I had easy access to a compressor, I think I would still prefer to use a standard pneumatic nailer. However, for those instances where you are willing to sacrifice weight/size for portability, this nailer is ideal!

i must admit i was somewhat skeptical about dropping 400 bucks on a tool that hadnt been out all that long but it has definitely proven its worth. we have two other ones and the only problem i seem to encounter is that it doesnt like to advance when shooting 2 and a half inch nails at times. all three guns seem to act up only when using the large nails but only intermittently. Other than that its a great tool for trim, especially baseboards because it doesnt kick any drywall dust.

It is everything that was promised and more. The batteries last a long time and the rapid fire setting is awesome. It will shoot as fast as any air gun. It is heavy but seems to be well built.
br /I have been using the paslode finish nailer for the last few years but this gun will easily replace that. No gas cartriges to buy makes it very attractive. The nails don't leave any plastic things that have to be removed before you putty and paint.

Like this tool. The nails are more costy than the straight unit, but the slant is more versatile. Nice in tight areas to "point and shoot" where a conventional hammer-nail approach is always a major pain in the (...) experience. This thing will sink a nail out of sight in most anything.

Incredible tool. With no hose or cord I found I could quickly and easily use the DC618 at any angle, and with no struggle. Though it's not light because of the battery, it is very well balanced. So much, it wins hands down over my air nailer.
br /
br /I had just a little trim work to complete, and it handled it easily. The 20 degree head fit into every corner I tried. I was so enamored with it that I started inventing additional uses.
br /
br /My weekend project was to build and roof an 8 ft long, narrow, attached shed to hold my lawn equipment. The 8 ft long support beams were 2 X 6's, and the rest of the frame was 2 X 4's. The end walls were fitted out with 1 X 6 cedar slats. I used the DC618 with 2 1/4" finishing nails to frame the members into place until I could better secure them with 3" exterior screws. It was like a third hand!
br /
br /Working alone, I used it to position and hold each joint of the frame, including the diagonal support braces. That would have been a real struggle with my pneumatic nailer. I had a virtual assembly routine going. Measure cut, then position and fix into place with this nailer. Then come behind with my Dewalt 18V drill and screws. It was a flawless routine. It made me laugh.
br /
br /I even used it with 1 1/4" nails to position the underlayment of (used)warped 5/8" plywood as I prepared the roof for shingles. I used a good deal of used materials in this project. Took a number of shots to hold down the bowed plywood, but it held it until I could better secure the plywood with 1 1/4 roofing nails.
br /
br /I estimate I used over 300 nails and the battery was still strong.
br /
br /I recommend this 20 degree model. The angled nail media is more limited (brands, store availability), but the head fits into places I doubt the straight model could reach.
br /
br /I don't need my pnuematic finish nailer any longer!

I bought this tool to patch an old wood floor and install trim in a house I am remodeling. Although it seems heavy at first, it feels good in the hand, and in use you won't feel the weight. I shot over 1,000 nails into oak strip flooring with not one jam. I did forget several times to check the magazine and refill the nails, but this was no fault of the nailer. And once I recognized the sound of an empty fire, it was no problem. I love this tool. I can't imagine using a pneuwatic nailer and compressor for trim or light duty work. This thing shoots as fast as you can move it, and with the adjustable depth setting I can place a nail perfectly in anything. HIGHLY RECOMMENDED.

very good tool, saved me a lot of time, worked perfectly for every need I had around the house such as trimwork, baseboards and molding.

No gas can. No hose! This is the BOMB. I love this nail gun very much. It's very handy on do-it-yourself projects. I fire whenever i want to. The gun is very quiet. I can't believe how good this is. It's expensive but it's worth every penny. I am hoping Dewalt will come out with a 15 guage gun or framing guns using the same technology. A best buy if you want a 16 gauge nail gun with no hassle.

This has become one of my favorite tools in the 6 months or so I have owned it. Yes it's a little heavy, but you get used to that. It does make a strange, unexpected sound when the safety is pressed against your workpiece as the flywheel is engaged. This too you get used to, just warn unsuspecting first time users. It drives the nails just as well as my Bostitch 16g air nailer, just not as light weight. Sure beats having to lug out the compressor and airhose on those smaller jobs or up on a scaffold.

I had Home Depot install windows for me and the man who installed them was using this gun for some of the capping work he was doing. Said it was his favorate tool - period. I needed to do some trim work and purchase the same gun except I got 20 degree angle. It has worked very well. Lots of nails shot without any missfires and great battery life. Nail sizes from 1.25" to 2.5". No hoses. No compressors. No kidding. I love this tool you will too.

A must for base, crown, casing, etc. Have not been able to run down a battery yet, but I'm not a production finish guy. Nails shoot straight every time. Accurate depth adjustment. Accepts DeWalt Paslode brads. Nice trigger operated "headlight" feature for darker areas. Integrated belt hook another nice feature. Selectable one-at-a-time or sequential "bump" modes. Naturally heavier than traditional air-operated nailers, but alot lighter than carrying my pancake compressor hose from room to room. Not for tight places, so hold on to your pin nailer.

I am a DIY guy. One of my buddies had one and I used it to trim a house. Well, I bought my own to do my house and an 3 flat. The only thing that takes getting used to is the extra weigth from the battery. On the positive side there is no more pan cake compressor or hose. I consider it well worth it. I have yet to run down one battery.

two other carpenters at my company own the Paslode finish gun. They always complain about the price of the fuel cells and how it needs to be disassembled and cleaned periodically. I chose to buy this to eliminate the need for the fuel cells. So far I have no beef with it. It's a bit larger and heavier than the Paslode but still lighter than carrying a compressor around. Also, the LED lights have been indispensable in more than one situation.
br /
br /good deal!
br /
br /

I am satisfied with the nailer. It does everything which I expected of it.

i bought this gun about 4 months ago and have been using it 3 to 4 times a week works great nice that it takes the same battery as the rest of my other tools i been using it in solid oak and works great has a little truble putting 2 1/2" nails in solid oak but my paslode impluse did to it is great that there are no fuel cells to run empty or freeze up in the cold gun is much quieter than the impulse and does not need cleaned and oiled all the time this is a great gun my impulse has not left the case since i bought it

If you're looking for a cordless nail gun, you will not be disappointed. I have used this on several occassions over the past few months and I have yet to use more than one battery in a single use. It lasts a long time and it hasn't yet jammed. It is perfect if you have no electricity available and it beats the whole compressor and hose set-up if you do have electricity. The only reason I gave it 4 stars instead of 5 is that it appears they have blown me off on the "free tool" deal that was going on when I bought it.

I read the online reviews. They help me a lot when making up my mind. I was nervous about DeWalt's nailer because so many people commented on its weight. I own a lot of 18v DeWalt tools so I weighed one of them to better understand how much heavier the nailer would be. I found out my drill is almost as heavy as the nailer. Once I knew that I took a chance on the nailer. I got it yesterday and was pleased that it really doesn't feel all that heavy.
br /
br /I'm NOT a professional contractor but I do a LOT of DIY stuff. I'm rebuilding my house from the inside out, tearing out everything right down to the studs and starting over. New windows, new siding, new interior walls, new wiring, new plumbing,... literally everything. I've been using DeWalt's 18v tools a lot and have liked them. That's what drew me to the nailer. Although I've only played with the nailer so far, I like it also. It's not too heavy at all. Not light. But something that CAN be worked with.
br /
br /I appreciate professional people and others who have left reviews. They sometimes compare DeWalt's nailer with the lighter air powered equipment. If that's what they're used to then I'm sure the extra weight of the DeWalt is frustrating to deal with. But I'm not holding it all day long and for the ease and convenience of a non-air powered tool, it's well worth it for ME. Plus, it uses the same batteries as my other DeWalt tools. It made sense for my use.
br /
br /The only thing that surprised me was the whirring noise that starts as soon as you place the tool head on the wood. I understand that it's getting itself ready to fire, but the noise continues until you press the trigger. It's a little annoying, but it stops immediately (at lease in non-sequential mode) after you press the trigger. I don't like the noise, but I can get used to it.
br /
br /Once I've used the tool for a while I'll update this comment with more insightful details. But for now - I'd certainly recommend the nailer if you're only afraid of its weight.

I've had my Dewalt cordless nailer for about eight months. I'm a "former" carpenter, and still do projects at home and for others.
br / I have some pretty neat tools, but I must say, this nailer is my favorite. I have trimmed out four houses, done a score of other smaller jobs, and the gun ALWAYS works! I'm not sure how many boxes of nails I've gone through......and the gun has jammed FOUR TIMES! That's it! When it did jam, the nail (last one in the run) was easily removed. The batteries just last forever. If you keep one on the charger while using the other, you'd be hard-pressed to run out of battery life. OK, as you can tell, I love this nailer. Don't worry about the weight; it's well balanced. This gun helps me do better work, easier work, faster work. That's enough for me.

I first tried the Black and Decker BDBN1202 (it was cheaper), the first one I received was DOA, the second one nailed inconsistently. I returned it and bought the DEWALT DC618K. All I can say this nailer blows away the Black and Decker, it may cost a little more but it is worth it. Save yourself the trouble buy the DEWALT first.

To bad amazon won`t let you price match,Home depot has it for 300.00 50.00 less than amazon.

I just bought my second DeWalt DC618 nailer. I do a fair amount of remodeling with my two sons. This nailer has been great. It's nice not having to lug around a compressor and being able to nail without cords or hoses. This nailer has plenty of power, even with hard woods like oak. The reason I needed a second nailer is because my son will not give back the nailer he "borrowed" for a very large house rebuild that he is doing. I think a third nailer is probably in our future.
br /It has become an indispensable tool.

Faced with a major overhaul of a 120 year old house, I wasn't looking forward to doing all the trim with a hammer and nailset, so I purchased a finish nailer. I wanted the ease of use of a cordless, which pretty much narrowed it down to DeWalt or Paslode. Not having to deal with both batteries and gas tilted me in favor of the DeWalt. It uses the same nails as the Paslode (in fact, that's all I use since none of my local stores carry the DeWalt nails).
br /
br /Other reviewers has mentioned the DeWalt is heavy. Well, it sure isn't light, although I find it comfortable to hold and easy to use, even standing on a step ladder putting up crown molding over my head. My 26 year old daughter has no problems using it in any position either (it's her house). With all the wainscoting, beadboard, crown, baseboard, chair rail and every other imaginable kind of trim in this old victorian, the nailer functioned flawlessly. We shot many, many boxes of nails and wore out two rubber noseguards without a single jam.
br /
br /The only issue is shooting thin nails into hard word. While most of the wood is pine, it's old first growth southern yellow pine that's almost as hard a oak. If you don't pay attention to the direction of the chisel point of the nails relative to the grain, the nail will follow the grain. Sometimes it'll even make a u-turn, so you need to think about where you put your hands when using this tool!! Same for knots or other defects in the wood. This is all covered in the manual, although I don't recall it making a point of thinking about the positioning of the chisel point. Sometimes you need to turn the nailer so the long edge of the chisel point is across the grain so it cut through it instead of following it.
br /
br /The angled magazine makes it surprisiningly easy to get into small locations. Actually better than my straight magazine brad nailer, which is much smaller overall.
br /
br /Pay attention to which model you're looking at when comparing prices - the 618K has one battery while the 618KA comes with two, and batteries are expensive. I have the KA, and when we were doing trim we never had a problem running out of battery - in fact, many days we didn't have to switch at all. I never counted how many nails you could do on a charge - we never ran it down. On days when we used it heavily, we'd just swap batteries every few hours when we took a break.
br /
br /The bottom line? I love it. The only negative is the weight, but that never really bothered us when we were actually using it. If I had one complaint, it's that there's no good position to put it down, other than standing on the battery. In that position, it's top heavy, so you sure don't want to put it on the top of your step ladder while you're fiddling some piece of crown molding into position. And while the weight didn't bother us using it, it's a lot when it's hanging on your belt by the hook!
br /
br /I like it so much a bought a DeWalt brad nailer when they came out. Unfortunately, I'm not nearly as happy with the brad nailer, but that will be a different review.

The other reviews peg the performance pretty well, yeah it shoots nails and as fast as you want and the battery life is good, but this thing is HEAVY, HEAVY, HEAVY!!!! Not only is it heavy but it is big and very front heavy even with the 18 volt battery.
br /
br /Ok someone is probably calling me a weakling by now but the truth is I am a general contractor who routinely throws double sheets of 5/8 drywall on top of my van solo!
br /
br /Problem is I own the paslode 16g angle finish nailer and the dewalt is a lead ball next to the paslode. The dewalt feels at least twice the weight and twice the size. when up on a ladder
br /doing crown molding dont expect to set this baby down on the ladder top its to large and will fall. It is also very cumbersome to hang on your tool belt.
br /
br /Ergonomics are important to me as I use my tools all day, and this tool is outwright painfull to use for long periods.
br /
br /On days when I went back and forth from the Dewalt to the Paslode it was like going from holding a paint brush to a sledge hammer. The paslode performs every bit as well as the dewalt and fuel cells are really not an issue. The only plus I can give the Dewalt is that it is far quieter than the paslode which my customers probably appreciate.
br /
br /Go for the paslode.

FIRST ONE JAMBED ALOT SO WENT AND GOT ANOTHER SAME THING 500 NAILS PER CHARGE? NO MAYBE 50 BEFORE IT STARTS TO NOT SET THE NAIL THEN IT JAMBS THEN YOU OPEN NOSE AND MANUALLY PUSH DRIVER BACK DOWN THEN YOU HAVE TO REMOVE THE BATTERY TO RESET BY THE WAY TAKES A HAMMER TO GET THE BATTERY OUT OF THE GUN THEN MAYBE YOU GET TO FIRE ANOTHER NAIL. I WOULD RETURN IT BUT I HAVE BEAT IT TO MUCH IN FRUSTRATION ANOTHER $400 I MAY AS WELL BURNED.

Just received this gun today. I figured I would use it instead of lugging my heavy compressor into each job. Charged the battery till the red LED stayed lit. Inserted 2-1/2" nails and went to test on some pallets. Shot 6-7 nails and each one was protuding 1/2". Increased the depth guage from setting 1 to 6. Then fired one more nail and it jammed, with about 3/4" still exposed.
br /Cleared the jam and tried again, nail gun started making a real sick mechanical sound...like grinding gears? Gun is now totally dead, this after trying to use for about 2 minutes. Just for fun I hooked up my SFN40 finish nailer and shot some 15 guage 2-1/2" nails into the same pallet and it sunk the nails just fine. I guess I'll stick with air guns for now.